About Us FAQ's Blog Certifications Downloads
estimation@ferrobend.com +91-8369719424
Contact Get a Quote
Flanges› Dimensions› ANSI / ASME› B16.36› Class 1500 Orifice RF Welding Neck

ASME B16.36 Class 1500
Orifice RF Welding Neck Flange

ASME B16.5 Class 1500 Orifice RF Welding Flange Technical Drawing
DIMENSIONAL DATA
NPS Raised Face
OD (R) 		Flange
OD (O) 		Minimum Thickness
of Flange (T) 		Hub
Length (Y) 		Hub
Diameter (X) 		Hub Diameter of
Beginning of Chamfer(A) 		Bore
(B) 		Diameter
of Pressure
Connection
TT 		Bolt Circle
Diameter 		No. of
Holes 		Hole
Diameter 		Diameter
of Bolts 		Stud
Bolt Length
1 2.00 5.88 1.50 3.25 2.06 1.32 Specified
by
purchaser		 1/4 4.00 4 1.00 7/8 6.00
1-1/2 2.88 7.00 1.50 3.50 2.75 1.90 Specified
by
purchaser		 1/4 4.00 4 1-1/8 1 6.25
2 3.62 8.50 1.50 4.00 4.12 2.38 Specified
by
purchaser		 1/4 6.50 8 1.00 7/8 6.00
2-1/2 4.12 9.62 1.62 4.12 4.88 2.88 Specified
by
purchaser		 1/4 7.50 8 1-1/8 1 6.50
3 5.00 10.50 1.88 4.62 5.25 3.50 Specified
by
purchaser		 3/8 8.00 8 1.25 1-1/8 7.25
4 6.19 12.25 2.12 4.88 6.38 4.50 Specified
by
purchaser		 1/2 9.50 8 1.3/8 1-1/4 8.00
6 8.50 15.50 3.25 6.75 9.00 6.63 Specified
by
purchaser		 1/2 12.50 12 1.50 1-3/8 10.50
8 10.62 19.00 3.62 8.38 11.50 8.63 Specified
by
purchaser		 1/2 15.50 12 1.75 1-5/8 11.75
10 12.75 23.00 4.25 10.00 14.50 10.75 Specified
by
purchaser		 1/2 19.00 12 2.00 1-7/8 13.50
12 15.00 26.50 4.88 11.12 17.75 12.75 Specified
by
purchaser		 1/2 22.50 16 2-1/8 2 15.00
14 16.25 29.50 5.25 11.75 19.50 14.00 Specified
by
purchaser		 1/2 25.00 16 2-3/8 2-1/4 16.25
16 18.50 32.50 5.75 12.25 21.75 16.00 Specified
by
purchaser		 1/2 27.75 16 2-5/8 2-1/2 17.75
18 21.00 36.00 6.38 12.88 23.50 18.00 Specified
by
purchaser		 1/2 30.50 16 2-7/8 2-3/4 19.75
20 23.00 38.75 7.00 14.00 25.25 20.00 Specified
by
purchaser		 1/2 32.75 16 3-1/8 3 21.50
24 27.25 46.00 8.00 16.00 30.00 24.00 Specified
by
purchaser		 1/2 39.00 16 3-5/8 3-1/2 24.50
Notes:
A) Dimensions are shown in inches (millimeters). For bolts and bolt holes, dimensions are in inches.
B) Welding neck flanges NPS 3 and smaller are dimensionally identical to Class 600 flanges and may be so marked.
C) All other dimensions are in accordance with ASME B16.5.
D) Other NPT sizes may be furnished if required.
E) For slip-on and threaded flanges, verify that TT drilling extends to inside diameter of pipe after assembly and is free from burrs.
F) Bolt lengths include allowance for orifice and gasket thickness of 6 mm (0.25 in.) for NPS 1 to NPS 12 and 10 mm (0.38 in.) for NPS 14 to NPS 24.
G) In conformance with ASME B16.5, stud bolt lengths do not include point heights.

Need ASME B16.36 Class 1500 Orifice RF Welding Neck Flanges for Your Project?

Precision Engineering. Technical Expertise. Global Supply.

Request a Quote Download U.S. Customary Datasheet Download Metric Datasheet